Configure RIP on Juniper and Cisco Routers

In this simple lab will show how to configure RIP routing protocol on Juniper and Cisco routers.

rjlogs, lab, RIP, cisco, juniper, gns3

R1 is a Cisco router, J1 and J2 are Juniper routers.

Let’s starting from J1 :

Assign IP address to each interfaces: IP 172.28.1.3/24 on interface  ge-0/0/0 that connected to R1, 172.28.2.3/24 on interface ge-0/0/1, and 1.1.1.1/32 for IP loopback interface.

[edit]
root@J1# set interfaces ge-0/0/0 unit 0 family inet address 172.28.1.3/24

[edit]
root@J1# set interfaces ge-0/0/1 unit 0 family inet address 172.28.2.3/24

[edit]
root@J1# set interfaces lo0 unit 0 family inet address 1.1.1.1/32

Now tell the router what interfaces will participate in RIP, and we have to give the process an identifier, here we call it RIP-LAB.

[edit]
root@J1# edit protocols rip

[edit protocols rip]
root@J1# set group RIP-LAB neighbor ge-0/0/0.0

[edit protocols rip]
root@J1# set group RIP-LAB neighbor ge-0/0/1.0

Continue reading “Configure RIP on Juniper and Cisco Routers”

RIP Default Route with Redistribute Static

topology, gns3, rjlogs

Same with previous post about RIP Default Route with Default-Information Originate. But now we will use static default route that redistributed into RIP.

Assumed R2 is connected to internet through interface null0.

Continue reading “RIP Default Route with Redistribute Static”